Parts For 110975661601 - AppliancePartsPros.com (2024)

QuantityAdd to Cart

The Thermal Fuse is an OEM replacement part for Whirlpool dryers. This easy-to-install thermal cut-off is designed to shut down your dryer when temperatures become too high, protecting the appliance from overheating. It's a one-time fuse, meaning it cannot be reset and needs to be replaced. It can be tested for continuity with a multimeter.

Causes of Bad Thermal Fuse

• Excessive lint buildup in the dryer vent
• Poor air flow causing overheating
• Failing to clean out the lint filter regularly
• Faulty heating element or drying cycle thermostat

Don't let a faulty dryer leave you stranded with wet clothes! Replace your dryer's Thermal Fuse to get back to using your dryer worry-free.This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms

• Won't start
• Timer will not advance
• No heat or not enough heat

See more...

Do-It-Yourself Stories from Customers like You No heatDennis G. • Kearny, NJ • January 14, 2017

I did the recommended checks of parts as listed on the website. I would recommend as one other person did but I did not listen the first time and that is to check all the parts don't stop at the first part you find bad. As I had to make two orders paying shipping twice because I thought I found a bad part when testing the igniter but the thermal fuse was also bad and since in a different part of the machine I did not take the time to check it, bad mistake.Also one tool mentioned in the video... Read more

QuantityAdd to Cart

The Belt is an OEM replacement part for Whirlpool dryers. It acts as a transmission to power the drum rotation during the drying cycle. The belt reliably conveys motion from the motor to the drum, ensuring garments are properly tumble-dried.

Symptoms of a bad belt include:

• The drum not turning or rotating slowly
• Excessive noise and vibration coming from the dryer
• The belt slipping off the pulley
• Discoloration, cracking, or fraying of the belt

Causes of a bad belt can be normal wear and tear over time, overloading the dryer with too many wet items, or structural damage to the belt itself.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms

• Heat stays on after drum has stopped
• Will not tumble
• Touchpad does not respond

See more...

Do-It-Yourself Stories from Customers like You Broken dryer beltBob B. • St Louis, MO • September 12, 2015

Unpluged dryer first. Then took the lint filter out and removed the two philips screws inside the lint filter lid. Then take a paint scraper just under the top of the dryer two inches from the left front corner and pushed in a little to release the snap connector and did the same on the right side. Then lifted top over. Then take a 5/16 socket or nut driver and remove the two screws on on the left inside panel, then the right side. Lean front out a little and remove the two wires one the back... Read more

QuantityAdd to Cart

The Dryer Repair Kit is an OEM replacement part for Whirlpool dryers, designed to address common wear and repair issues. This kit ensures that the drum rotates freely and quietly.

Symptoms of a dryer in need of this repair kit include:

• Unusual noises, such as squeaking or thumping
• The dryer drum not turning smoothly or at all
• Extended drying times

Causes of these issues can range from normal wear and tear, which gradually degrades the rollers, belt, and pulley, to overloading the dryer, which can accelerate the wear on these components and lead to premature failure. Regular maintenance and timely replacement of these parts can prevent more serious problems and extend the life of the dryer.

What's Included:

• Drum belt 661570V
• 4 drum support rollers WPW10314173
• Idler pulley 279640
• Tri rings WPW10512946
• Washer WP233520
• Instruction sheet

Please note: Some parts in this kit may not fit your specific model. Use your model number to check for your specific parts.

This part fixes the following symptoms

• Will not tumble
• Noisy

See more...

Do-It-Yourself Stories from Customers like You Very loud squeak inside whirlpool duet sport dryer model wed8300sw0Steve W. • Boone, NC • September 27, 2014

Our Whirlpool Duet Sport Dryer, 6.7 cu. ft, Model WED8300SW0, bought new 8 years ago (2006), developed a VERY loud squeaking noise inside the dryer. Removing the top panel did not isolate the problem. I researched the problem and through the videos appearing on Appliance Parts Pros (APP) website and a few others, determined that the problem was either the drum belt, one or more of the 4 drum support rollers, or idler pulley or any combination of these. I ordered the kit to allow for... Read more

QuantityAdd to Cart

The Cycling Thermostat is an OEM replacement part for Whirlpool dryers. It monitors internal temperatures and cycles power to the heating element accordingly. The thermostat ensures the drying air reaches and maintains the optimal heat level selected for fast, effective drying results.

Symptoms of a bad cycling thermostat include:

• The dryer not heating or heating inconsistently
• Frequent trips of the circuit breaker
• Slower than normal drying times
• Burned clothes due to overheating

Causes of failure may be related to normal wear over time, dust buildup affecting sensor readings, or incorrect thermostat calibration.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms

• Too hot
• Timer will not advance
• Takes too long to dry

See more...

Do-It-Yourself Stories from Customers like You My 22 year old dryer just stopped getting hotMichael M. • Brunswick, GA • November 04, 2015

After 22 years my Kenmore (Whirlpool) dryer stopped getting hot. So I went ahead and reviewed the videos and figured I could repair it myself. It should be noted that the only part that failed the Ohm test was the thermal fuse. However, I figured that since I have it apart, I might as well go ahead and replace the heating element and the cycling thermostat.Here is a rundown of what I did and how long it took:•Taking the back off and vacuum <1 minute•Finding the components (from the... Read more

QuantityAdd to Cart

The Dryer Gas Valve Coil Kit is an OEM replacement part for Whirlpool dryers. It is a set of coils that control the flow of gas fuel to the burner. The gas valve regulates the precise amount of gas needed to properly combust and generate heat for drying clothes.

Causes of a bad gas valve coil can be wear and tear from regular use, lime or mineral buildup on the coils over time, or physical damage to the coils.

Symptoms of a bad gas valve coil kit include:

• Inconsistent or incomplete drying
• Slow or intermittent drying
• Burning smell from the gas dryer
• Improper burner ignition or non-ignition

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms

• Timer will not advance
• No heat or not enough heat
• Shuts off too soon

See more...

Do-It-Yourself Stories from Customers like You Flame to dry clothes would go out after about a minute and wouldn't reigniteWendell M. • Brown Deer, WI • June 19, 2014

I'm starting with a quick background on my dryer. About 18 months ago the belt on the dryer started slipping and squealing. I had a can of belt dressing spray so I popped the top open and sprayed the belt. It actually worked for about a year before it started squealing again. For the next 6 months I had to spray it more and more often. Then the clothes stopped drying. Obviously, at this point, I had to get off my lazy ass and fix the dryer. Searched my dryer's model number on the internet and... Read more

QuantityAdd to Cart

The Rear Drum Support Roller Kit is an OEM replacement part for Whirlpool dryers. This kit includes the rear support rollers that are crucial for maintaining proper drum alignment and smooth rotation during the drying cycle.

Symptoms of a faulty Rear Drum Support Roller Kit include:

• Excessive vibration or shaking during drying cycles
• Loud grinding or squeaking noises from the rear of the dryer
• Uneven wear or visible damage to the rollers
• Potential drum misalignment, rubbing against the drum casing, or leaks

Causes of a bad Rear Drum Support Roller Kit can include wear and tear over time, excessive load imbalances, or physical damage from impact or mishandling.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryer models.Matching belt 341241 and idler pulley WP691366.

This part fixes the following symptoms

• Noisy

See more...

Do-It-Yourself Stories from Customers like You Thumping/vibrating/rattling pretty bad fixed 100%!Doug P. • Durham, NC • November 15, 2015

I am very glad to find the AppliancePartsPros.com website! Their instructional videos and easy parts reference made all the difference. I had originally planned to have someone come to fix my dryer, but no one was available for at least a week. I checked out their site, and after watching the videos I felt confident I could repair my appliance. I determined that a drum roller wheel had gone bad. Apparently it was going bad over the last five years since the dryer always seemed to rattle a... Read more

QuantityAdd to Cart

The Idler Pulley Assembly is an OEM part compatible with Whirlpool dryers. It is a crucial component of the dryer's drive system, responsible for maintaining proper tension and alignment of the belt that drives the dryer drum. Measuring 5.5 x 3.5 x 3 inches, this idler pulley assembly typically consists of a pulley mounted on a bracket or arm, which can pivot or move to apply the necessary tension to the belt.

Symptoms of a faulty Idler Pulley Assembly include:

• Loud squeaking or grinding noises during operation
• The dryer drum not spinning or rotating properly
• Excessive vibrations or shaking during the drying cycle
• Visible wear or damage to the belt or pulley components

Causes of a bad idler pulley assembly can include bearing failure, physical damage from foreign objects, or normal wear and tear over time.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryer models.

Do-It-Yourself Stories from Customers like You The idler pulley was squeakingBob C. • Fall River, MA • June 12, 2014

I bought the new arm assembly because after a few times of going in through the front of the machine and reaching in the back under the drum I could get to the pulley, so I took it off of the arm and lubed it and then replaced it back inside, put the belt back on and it was good for a week or so , then started squeaking again. So after doing this about 6 times I got the impression that is was the wheel and shaft on the arm were worn out causing the wheel to wobble and wear the arm. I then... Read more

QuantityAdd to Cart

The Light Bulb is an OEM replacement part for Whirlpool appliances. It is responsible for providing illumination inside the appliance, allowing for better visibility when loading, unloading, or inspecting the interior.

Symptoms of needing to replace the light bulb include:

• Dimming or flickering light
• Complete lack of illumination inside the appliance
• Visible signs of damage or burnout on the bulb itself

Causes of a faulty light bulb can include normal burnout over time, electrical issues, or physical damage due to impact or vibrations.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore appliances.

Do-It-Yourself Stories from Customers like You Jennair jjw9630cas double oven doors did not close all the way and the light would not go outWayne W. • East Longmeadow, MA • February 13, 2016

I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it... Read more

QuantityAdd to Cart

The Thermistor is an OEM part for Whirlpool brand dryers. It is a temperature-sensing resistor that monitors air temperature changes during the drying cycle. The thermistor provides feedback to the control board on heating element performance and internal air condition.

Symptoms of a failed thermistor include:

• Inaccurate temperature readings and selections
• Improper or incomplete drying
• Safety issues from overheating due to lack of feedback
• Error codes displayed on the control panel

Causes can be related to normal wear and environmental exposure over time. Failure prevents the dryer from achieving optimal drying conditions.

This genuine Whirlpool thermistor replacement restores precise air temperature monitoring. It ensures the control board receives accurate input to effectively regulate heating levels. This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms

• Too hot
• Shuts off too soon

See more...

Do-It-Yourself Stories from Customers like You First longer to dry then no heat in dryerBobbie M. • King George, VA • October 06, 2017

I am not an electrician, just a housewife with limited funds and a desire to DIY. I used the provided videos for knowing how to replace everything except the heating element which I just guessed based on other reviews and seeing how the other parts worked. Our dryer is 11 years old Whirlpool Gold HE and I have only ever cleaned the lint tray. My husband replaced the belt about five years ago and he did clean out the inside of the dryer. Started by ordering a thermal fuse because it was... Read more

QuantityAdd to Cart

The Idler Pulley is an OEM part for Whirlpool dryers, responsible for maintaining the correct tension on the drive belt, allowing it to remain tight and aligned, preventing slipping and contributing to the consistent rotation of the drum during cycles.

Symptoms of a bad Idler Pulley include:

• Squealing or squeaking noises
• The dryer drum failing to turn
• Excessive vibration or unusual sounds

Causes of failure can range from normal wear and tear, which can lead to the pulley's bearing wearing out, to the accumulation of lint and debris causing the pulley to seize or function improperly. Additionally, a cracked or damaged pulley can lead to belt misalignment and slippage.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Fits all Whirlpool-made dryers (Whirlpool, Kenmore with prefix 110, Roper, KitchenAid, and Estate). Matching belt 341241 and rear support rollers 349241T. Whirlpool dryer repair manual 677818L.

This part fixes the following symptoms

• Will not tumble
• Takes too long to dry

See more...

Do-It-Yourself Stories from Customers like You Thumping/vibrating/rattling pretty bad fixed 100%!Doug P. • Durham, NC • November 15, 2015

I am very glad to find the AppliancePartsPros.com website! Their instructional videos and easy parts reference made all the difference. I had originally planned to have someone come to fix my dryer, but no one was available for at least a week. I checked out their site, and after watching the videos I felt confident I could repair my appliance. I determined that a drum roller wheel had gone bad. Apparently it was going bad over the last five years since the dryer always seemed to rattle a... Read more